Highspeed TRION3/TRION Power Modules
Highspeed power modules of the TRION3 and TRION series for 4-phase power analysis are user-exchangeable signal conditioning modules that provide separate A/D conversion on each channel up to 10 MS/s. Because of the unique modularity, up to 8 channels can be equipped with different user-exchangeable sub-modules for direct current or voltage measurement. Any TRION(3) based data acquisition system can become a Power Analyzer.
- Simultaneous sampling for all analog inputs
- High resolution up to 24-bit, with anti-aliasing filters
- High voltage & current inputs and high flexibility with sub-modules
POWER MODULES
| POWER MODULES | CHANNELS | SAMPLE RATE/CH. | RESOLUTION | ISOLATION | CONNECTOR TYPES |
||
|---|---|---|---|---|---|---|---|
| TRION3 -1810M-POWER
|
  |
 |
8 (4 U / 4 I) | 10 MS/s | 18-bit | ISO | Fixed: 4 x Safety banana, CAT III 1000 V – Exchangeable: 4 x Sub-Modules |
| TRION3 -1820-POWER
|
|
|
8 (4 U / 4 I) | 2 MS/s | 24-bit | ISO | Fixed: 4 x Safety banana, CAT III 1000 V – Exchangeable: 4 x Sub-Modules |
| TRION-1820-POWER
|
|
|
8 (4 U / 4 I) | 2 MS/s | 18-bit | ISO | Fixed: 4 x Safety banana, CAT III 1000 V – Exchangeable: 4 x Sub-Modules |
| TRION-1810-HV
|
|
|
8 (4 U / 4 I) | 1 MS/s | 24-bit | ISO | Fixed: 4 x Safety banana, CAT III 1000 V – Exchangeable: 4 x Sub-Modules |
| TRION3 -1810-SUB-8
|
  |
|
8 | 1 MS/s | 18-bit | ISO | Fixed: 0 – Exchangeable: 8 x Sub-Modules |
| Compatibility: The highspeed DEWE3 systems support both, TRION3 and TRION modules. The DEWE2 systems only support TRION modules. Here you find the overview of our DAQ systems |
|||||||
Compatibility
There are two series of power modules available:
The TRION-18xx power modules can be used in every DEWETRON system of the DEWE2 and DEWE3 series.
While the TRION3 -18xx power modules for the highest performance are only compatible with the DEWE3 series instruments.
Simultaneous sampling in perfect synchronization
The highspeed power modules combine the power of simultaneous sampling and 18-bit ADC technology with advanced DEWETRON signal conditioning – plug one power module right into your DEWETRON instrument.
Plug’n’play
power modules
Choose your power module, plug them into your DEWE2 or DEWE3 instrument, turn the system on and get to work!
All power modules are automatically identified and configured within the software OXYGEN as soon as it is launched.
USER-EXCHANGEABLE TRION SUB-MODULES
In combination with our power modules (see the table above), the interchangeable TRION sub-modules can be used to create individual input configurations. Because of the unique modularity, up to 8 channels can be equipped with different sub-modules for direct current or voltage measurement. Thus almost any kind of voltage or current sensor can be connected to a DEWETRON Power Analyzer. The sub-modules are user-exchangeable at any time, automatically detected and the calibration data is directly stored inside the sub-module.
| SUB-MODULES | RANGE | SAFETY | BANDWIDTH | CONNECTOR | EXCHANGE BY USER |
|||
|---|---|---|---|---|---|---|---|---|
| SUB-MODULES FOR CURRENT INPUT (directly & sensors) |
||||||||
 |
20 A module TRION-POWER-SUB-CUR-20A |
 |
|
20 ARMS (±40 APEAK) |
CAT II 600 V, unfused | 300 kHz | Safety banana (male) | Yes |
|
2 A module TRION-POWER-SUB-CUR-2A |
 |
|
2 ARMS (±4 APEAK) |
CAT II 600 V, unfused | 300 kHz | Safety banana (male) | Yes |
|
1 A module TRION-POWER-SUB-CUR-1A |
 |
|
1 ARMS (±2 APEAK) |
CAT II 600 V, unfused | 300 kHz | Safety banana (male) | Yes |
|
0.2 A module TRION-POWER-SUB-CUR-02A |
 |
|
0.2 ARMS (±0.4 APEAK) |
CAT II 600 V, unfused | 300 kHz | Safety banana (male) | Yes |
| SUB-MODULES FOR VOLTAGE INPUT | ||||||||
 |
1 V module TRION-POWER-SUB-dLV-1V |
 |
|
1 VRMS (±2 VPEAK) |
Not isolated. Depending on connected current clamp |
5 MHz | D-SUB-9 socket | Yes |
|
5 V module TRION-POWER-SUB-dLV-5V |
 |
|
5 VRMS (±10 VPEAK) |
5 MHz | D-SUB-9 socket | Yes | |
|
Clamp input module TRION-POWER-SUB-dLV-1 |
 |
|
5 VRMS (±10 VPEAK) |
150 kHz | D-SUB-9 socket | Yes | |
|
600 V module TRION-SUB-600V |
 |
|
600 VRMS (±1500 VPEAK) |
CAT II 600 V, isolated | 300 kHz | Safety banana | Yes |
|
5 V module TRION-SUB-5V |
|
|
5 VRMS (±10 VPEAK) |
CAT II 600 V, isolated | 300 kHz | Safety banana | Yes |
|
Seamless auto-range module TRION-SUB-XV |
|
|
600 VRMS (±850 VPEAK)60 VRMS (±100 VPEAK) 6 VRMS (±10 VPEAK) 0.6 VRMS (±1 VPEAK) |
CAT II 600 V, isolated | 300 kHz | Safety banana | Yes |
Fixed High-Voltage Inputs
4 channels on each power module are fixed high-voltage inputs with ±2000 VPEAK.
The other 4 channels are free for different user-exchangeable sub-modules.
The only exception is the TRION3-1810-SUB-8 module:
With its 8 user-exchangeable sub-modules, it is the most flexible TRION power module.
| FIXED HIGH-VOLTAGE INPUTS | RANGE | SAFETY | BANDWIDTH | CONNECTOR | EXCHANGE BY USER |
|||
|---|---|---|---|---|---|---|---|---|
| Voltage input U1, U2, U3, U4 |  |
|
1000 V (±2000 VPEAK) |
CAT IV 600 V / CAT III 1000 V |
5 MHz | Safety banana | No |
