Video Tutorials

#01: How to change the order of your menu symbols

#12: How to use Header Data

#16: How to name a file at recording start

#27: How to view a data file during recording with OXYGEN viewer

#28: How to automatically start recording when starting OXYGEN

#29: How to create a Demo System with the DEWETRON Explorer

#30: How to update the TRIONet firmware remotely

#31: How to change the measurement screen to dark mode

#34: How to update an OXYGEN license

#47: How to enable Multi-File recording

#69: How to use the file name pattern

#70: How to reset the local counter (file name pattern)

#74: How to reset all settings

#75: How to protect your setup

#76: How to prompt the header at the recording stop

#81: How to show the date in the event list menu

#87: How to store multi-files in a specific folder

#88: How to easily set up an OXYGEN-NET system

#89: How to quickly apply channel settings to all channels

#90: How to balance bridge amplifiers on several nodes

#91: How to change the startup behavior

#92: How to apply changes from one file to others

#93: How to change the language

#97: How to add a sensor to the sensor database

#100: How to enable and visualize line-line harmonics

#101: How to enable and visualize relative harmonics

#102: How to go back to a previous version of a measurement file

#103: How to easily switch between the Measurement and OXYGEN Settings

#104: How to use file split by absolute time

#105: How to roll back changes in DMD analysis

#106: How to compare multiple measurements

#112: How to change the synchronization source of a power group

#116: How to save a DMD file as a new file

#117: How to show errors and warnings as a list

#118: How to remove channels from a recorded file

#03: How to quickly get to the full-screen Data Channels List

#05: How to filter channels in the Data Channels List

#32: How to table scale with long lists

#22: How to change the sample rate for individual channels

#24: How to simply copy and paste channel settings

#45: How to deactivate channels

#46: How to deactivate storing of channels

#51: How to directly copy paste a picture on screen

#67: How to lock your channel settings

#77: How to use TEDS

#96: How to transmit an array channel over CAN

#98: How to apply a sensor to a channel

#122: How to add sensor delay compensation

#02: How to view multiple screens on different monitors

#08: How to display system data on the measurement screen (option 1)

#09: How to display system data on the measurement screen (option 2)

#17: How to create a recording indicator

#35: How to change the channel in the overview bar

#36: How to jump to a marker position

#41: How to rearrange your measurement screens

#53: How to change the width of the small menu

#54: How to change the playback speed

#66: How to save the measurement screen as video

#71: How to increase the 'Freeze' time

#79: How to show harmonics in a table

#95: How to rotate video pictures

#107: How to auto-detect CAN messages

#109: How to use ENUM scaling of CAN signals in OXYGEN

#06: How to use DejaView in LIVE Mode

#07: How to use DejaView in REC Mode

#13: How to use Header Data in a Text Instrument

#14: How to rename cursors

#19: How to zoom into your measurement

#26: How to display statistics data in a recorder

#33: How to create a reference curve

#48: How to activate harmonic cursors

#49: How to change from Hz to CPM

#50: How to change the transparency option

#52: How to load an external video

#55: How to link adjacent recorders

#56: How to link recorders on one screen

#64: How to show data labels

#65: How to change the number of axis labels

#58: How to change the line width

#108: How to quickly add a 3-phase power group

#111: How to show line-line values in a power instrument

#113: How to limit the XY-plot duration

#114: How to assign multiple channels to the X- and Y-axis of an XY plot

#121: How to change settings for multiple instruments

#20: How to export an active recorder region or between cursors

#80: How to export selected statistical values

#82: How to fill gaps when exporting channels with different sample rates

#84: How to split data on different spreadsheets

#86: How to round the number of decimals for the export

#94: How to export multiple files

#99: How to activate the automatic export after a recording stop

#04: How to create a Formula Channel

#10: How to simply create a power group

#11: How to use Array Math (applicable for harmonics & fft)

#37: How to create an FFT channel

#38: How to create a filter channel

#23: How to create statistical channels

#21: How to create an efficiency map

#68: How to use numeric headers as formula constants

#73: How to group formulas

#83: How to reset the statistics calculation

#85: How to set up a frequency measurement

#115: How to add a running statistic channel

#119: How to use ENUM scaling for math formulas

#120: How to add a triggered statistic channel

#39: How to create a trigger

#42: How to create a Snapshot event

#40: How to create a parallel action for a trigger condition

#72: How to stop measurement after a defined time

#78: How to force manual recording

#15: How to copy a measurement screen to a reporting page

#57: How to change the text size in a report

#43: How to create an Ethernet Sender

#44: How to create an Ethernet Receiver

#59: How to use the monitor output functionality

#60: How to use the math output functionality

#61: How to use the constant output functionality

#62: How to use the function generator
(part 1)

#63: How to use the function generator
(part 2)